The adapters can be used, individually or simultaneously, to control the device with HTTP ("web remote").
The web remote control works on any IP-based network, including wireless networks.
The ethernet connection additionally supports AVDECC 1722.1 remote protocol, which requires a
physical connection (cables), but does not require AVB switches. Wireless routers are not supported for
AVDECC.
To enable web remote functionality over HTTP:
1. Open the
remote
tab in the
STATE
section.
2. Ensure that the
HTTP Remote
setting is switched to
ON
.
USB
When the device is connected with a USB 2.0 cable to a Apple macOS™ or Microsoft Windows™
computer, a network device is automatically installed in the background that assigns the M-32 DA Pro
the following IP address:
Only
one
of the following products can be connected to the host computer via USB at a
time: RME M-32 AD Pro, M-32 DA Pro, 12Mic, AVB Tool, M-1610 Pro.
Ethernet
The integrated ethernet adapter will join an IP network when connected. If no DHCP server is found, for
example when connecting the M-32 DA Pro directly to a computer, an address is automatically self-
assigned (in the 169.254.0.0/16 subnet).
To find out the current IP address:
1. Open the
remote
tab in the
STATE
section.
2. The current IP address is displayed.
3. Enter the IP address in the address bar.
Connecting to the Remote Interface without IP address
Instead of using the IP address, the
device name
can be entered in the browser window, followed by
.local/
.
By default, the name is m32-da-pro, and the corresponding URL is therefore:
The length of the custom name should not exceed 63 characters. Spaces in the device
name should be written as hyphens ("-") when entering the URL.
RME M-32 DA Pro User’s Guide
8.5. Remote Control Overview |
34
