background image

 

 

User's Guide HDSPe AES

 © RME

9

 

In any case warranty does not cover damage caused by improper installation or maltreatment - 
replacement or repair in such cases can only be carried out at the owner's expense.  
 
No warranty service is provided when the product is not returned to the local distributor in the 
region where the product had been originally shipped. 
 
Audio AG does not accept claims for damages of any kind, especially consequential damage. 
Liability is limited to the value of the Hammerfall DSP. The general terms of business drawn up 
by Audio AG apply at all times. 
 
 

9. Appendix

 

 
RME news, driver updates and further product information are available on our website: 
 
http://www.rme-audio.com 
 
Distributor: 
Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 / 91810 
 
Manufacturer: 
IMM Elektronik GmbH, Leipziger Strasse 32, D-09648 Mittweida, Germany 
 
 

Trademarks

 

 
All trademarks, registered or otherwise, are the property of their respective owners. RME, 
DIGICheck and Hammerfall are registered trademarks of RME Intelligent Audio Solutions. 
HDSPe AES, HDSP AES-32, TMS, DIGI96, SyncAlign, ZLM, SyncCheck and TotalMix are 
trademarks of RME Intelligent Audio Solutions. Microsoft, Windows 2000, Windows XP, Win-
dows Vista and Windows 7 are registered trademarks or trademarks of Microsoft Corp. 
Steinberg, Cubase and VST are registered trademarks of Steinberg Media Technologies 
GmbH. ASIO is a trademark of Steinberg Media Technologies GmbH. 
 

Copyright 

©

 Matthias Carstens, 07/2012. Version 1.3 

Current driver version: Windows: 3.29, Mac OS X Intel: 3.03 

 

Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is 
correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. 
Lending or copying any part of the guide or the RME Driver CD, or any commercial exploitation of these media without 
express written permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifi-
cations at any time without notice. 

 

Summary of Contents for Hammerfall HDSPe AES









































































Reviews: