- 17 -
4-5. Basic operating procedures
The detection mode is used after power-on. Gas is detected in the ppm range.
buttons
Hold down for
3 secs
Illumination
lamp lights
up
button
Hold down for
1 sec
Hold down for
3 secs
button
buttons
buttons
Hold down for 3 secs
<AIR calibration>
<Alarm setpoint change>
<Snap logger record>
<Operation/alarm sound ON/OFF>
<Peak clear> <Peak hold ON/OFF> <Display mode>
* Displayed only when the clock
function is enabled
See "6-3. Clock function ON/OFF
setting" on page 32.
