- 26 -
5-2. Measured gas reading setting
Normally,
the concentration display of the detector is H2 by default; however,
other combustible gases or
CFC gases can be detected.
For
the list of possible detection gases, see the "Gas list" in the following page.
1
On the "GAS LIST"
screen in the display
mode, press the POWER
button.
The detector enters the gas
reading setting.
▼
The currently set gas name is
displayed.
2
Press the MODE or AIR
button to select a gas
name to be read
instead.
The gas name switches to
another every time the button is
pressed.
3
When the target gas
name is displayed,
press the POWER
button.
"END" is displayed, returning to
the display mode.