- 25 -
Display mode overview
Item
LCD display
Details
Peak display
Displays the maximum concentration
detected during the period from power-on
to the point of checking.
* To clear the peak display, hold down the
AIR button until "PEAK CLR" is
displayed.
Measured gas reading
setting
By changing the setting to the
pre-registered gas in the detector, the
converted concentration from the
detection target gas will be displayed.
(P. 26)
Log data display
Displays the data recorded by the snap
logger. (P. 28)
* Displayed only when the clock function
is enabled
See "6-3. Clock function ON/OFF
setting" on page 32.
Entering user mode
Enters the user mode.
(P. 29)
