73 • Setting Detailed Operational Parameters Using the SDM-PC2 Docking
11. Make any necessary updates to other inlets.
12. To return to the Main Window and save your changes, click
OK
in the
Cylinders Window and then click
Yes
in the window that comes up.
To return to the Main Window without saving your changes, click
Cancel
in the
Cylinders Window and then click
OK
in the window that comes up.
Defining New Cylinders
If your GX-6000 configuration requires the use of a cylinder that is not in the
predefined list, you can add that cylinder by either typing in the information for the
cylinder or by editing the information for an existing cylinder.
1. Launch the PC Controller Program and connect your SDM-6000(s) as
described in “Launching the PC Controller Program and Connecting an SDM-
6000” on page 60.
2 . Click the
Cylinders
button along the top of the main program window.
3. The Cylinders Window will appear.
Figure 36: Cylinders Window
