RKI Instruments SDM-6000 Standalone Configuration Operator'S Manual Download

Page: 58 / 124

53 • Setting Basic Operational Parameters in the Config Menu

b. To change any of the month/day/year settings, use the arrows below the

setting or press the current setting and type in the desired value on the

number pad that appears.

c. Press OK to save the changes and return to the Configuration Menu.

Press Cancel to return to the Configuration Menu without saving any
changes.

6 . To change the time:

a. Press the Time field.

b. To change any of the settings, use the arrows below the setting or press

the current setting and type in the desired value on the number pad that

appears. If the station is not using 24-hour time, the arrows below the

hour must be used to scroll through the AM and PM times.

c. Press OK to save the changes and return to the Configuration Menu.

Press Cancel to return to the Configuration Menu without saving any
changes.

Summary of Contents for SDM-6000





























































































































Search results

Summary of Contents for SDM-6000

Reviews:

Related manuals for SDM-6000

Brands by name

Popular brands

RKI Instruments SDM-6000, Standalone Configuration Operator'S Manual

Search results

Summary of Contents for SDM-6000

Reviews:

Related manuals for SDM-6000

Brands by name

Popular brands