GX-2009 Operator’s Manual
Maintenance • 61
5. As you pull the top of the rear case away from the front case, you will feel a slight click as
the bottom of the rear case separates from the bottom of the front case. Pull the rear case
away from the front case. Keep the instrument flat and steady so that the batteries do not
drop out of the case.
6. The batteries will be visible in the front case on the main circuit board. Once the front case
is removed, they are no longer held in place and can be easily removed.
7. Remove each battery by gently pulling it away from the circuit board. Each battery has an
integral holder that provides electrical connection to the circuit board.
Figure 20: Removing the Rear Case
NiMH Batteries
Main Circuit Board
Figure 21: NiMH Batteries
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
