GX-2009 Operator’s Manual
User Setup Mode • 55
1. At the PASSWORD screen, press and release the POWER MODE button. A screen will
appear that shows the current password feature setting.
2. Press and release the air button to change the displayed setting. When the desired setting is
displayed, press and release the POWER MODE button to save the setting.
3. If the password feature was set to
oFF
, the unit will exit the PASSWORD menu item and
return to the PASSWORD screen.
With the password feature set to
oFF
, you will be able to enter User Setup Mode without
entering a password.
4. If the password feature was set to
on
, the following screen will appear with the first digit
flashing prompting you to enter the password you want to use.
5. Use the AIR button to scroll through the numbers 0 - 9.
6. When the desired number is displayed for the first digit, press and release the POWER
MODE button to save the number.
7. The next digit will begin flashing.
8. Repeat Step 5 through Step 7 until you have set all four of the digits.
9. When you save the last digit, the unit will return to the PASSWORD screen.
oFF
PASSWORD
PASSWORD
0 0 0 0
PASSWORD
PASSWORD
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
