52 • User Setup Mode
GX-2009 Operator’s Manual
9. When you are done using the menu items in Calibration Mode, use the AIR button to
scroll through the menu items to the START item.
10. At the START screen, press and release the POWER MODE button. The GX-2009 will
begin its start-up sequence.
The User Setup Mode menu items are described below in the order in which they appear while
moving through User Setup Mode.
Setting the Date and Time
See “Setting the Date and Time” on page 34 in the Calibration Mode section for instructions
to set the date and time.
Performing a Fresh Air Adjustment
See “Performing a Fresh Air Adjustment” on page 34 in the Calibration Mode section for
instructions to perform a fresh air adjustment.
Performing a Span Adjustment in AUTO CAL
See “Performing a Span Adjustment in AUTO CAL” on page 35 in the Calibration Mode
section for instructions to perform a span adjustment in AUTO CAL.
Performing a Span Adjustment in ONE CAL
See “Performing a Span Adjustment in ONE CAL” on page 40 in the Calibration Mode
section for instructions to perform a span adjustment in ONE CAL.
START
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
