32 • Chapter 5: Setup Mode
AirLink 9850 Gas Monitor Operator’s Manual
5. Channel On/Off: Use
ADD
or
SUB
to toggle between “On” and “Off”.
NOTE:
Setting the channel to “Off” turns the channel off. When a channel is turned off, no
transmissions will be received for that channel.
6. Press
MENU
.
NOTE:
The following screens only appear if the address was set to “On”.
7. Low Alarm Increasing/Decreasing: Use
ADD
or
SUB
to toggle between “INC” and “DEC”.
8. Press
MENU
.
9. Low Alarm Value: Use
ADD
or
SUB
to adjust the low alarm value. The displayed value is in the
appropriate units for each channel. If the selected channel is a %LEL sensor, then the alarm point
values will be in %LEL.
10. Press
MENU
.
11. High Alarm Increasing/Decreasing: Use
ADD
or
SUB
to toggle between “INC” and “DEC”.
12. Press
MENU
.
