3. SETTING FOR COMMUNICATION
IMSRM04-E8
23
3.2.2 Between operation panel and control unit communication setting
Set the same communication setting to both the control unit and connecting operation panel.
Operation panel
Communication setting (data configuration, communication speed, etc.) are to be set on the screen of
the operation panel. For details on the setting and operating procedure, see the each operation panel
instruction manuals.
OPM :
See the Communication Initialize screen in the
Operation panel OPM
Instruction Manual
(
IMSRM03-E
)
OPM [Z-191]:
See the Communication Initialize screen in the
Operation panel OPM [Z-191]
Instruction Manual
(
IMSRM21-E
)
OPL:
See the Communication Initialize screen in the
Operation panel [OPL]
Instruction Manual
(
IMSRM11-E
)
OPM-H [Z-191]:
See the Communication Initialize screen of the
Operation panel OPM-H [Z-191]
Instruction Manual
(
IMSRM26-E
)
Control unit
Communication setting (data configuration, communication speed, unit address, etc.) are to be set by
the PCP module of the control unit.
Dip switch
It refers to
Setting the data configuration and communication speed
and it sets data
configuration and communication speed.
Unit address setting switch
It refers to
Unit address setting
and it sets unit address. Up to 8 control units can be connected to
one operation panel.
Setting range: 0 to 7
