6
IMSRM04-E8
2. CONNECTING
Connect connectors correctly in the right position. If it is forcibly pushed in with pins in the
wrong positions, the pins may be bent resulting in instrument failure.
When connecting or disconnecting the connectors, do not force it too far to right and left or
up and down, but move it as straight as possible. Otherwise, the connector pins may be bent,
causing instrument failure.
When disconnecting a connector, hold it by the connector itself. Disconnecting connectors
by yanking on their cables can cause breakdowns.
In order to prevent malfunction, never touch the contact section of a connector with bare
hands or with hands soiled with oil or the like.
In order to prevent malfunction, connect cable connectors securely, then firmly tighten the
connector fastening screws.
In order to prevent damage to cables, do not bend cables over with excessive force.
If the instrument is easily affected by noise, use the ferrite core in the both ends of the cable
(nearest the connector).
To prevent electric shock or instrument failure, turn off the power before
connecting or disconnecting the instrument and peripheral equipment.
WARNING
!
