RJG Lynx OR2-M, Product Manual

Page: 25 / 34

Product Manual | Lynx™ Shielded Dual‑Relay Output Module OR2‑M
RJG, Inc. 17
9.
Twist the top lid assembly around and
push down to locate the LEDs into
holes in front plate.
10.
Gently slide the front plate and
board assembly into the module
case.
11.
Install the module’s EMI gasket
and right side panel with four (4)
M3 x 8 mm panel screws; torque to
5 in.‑lb. (
±
5).
FUSE REPLACEMENT ( continued )
12.
Secure the module’s right side
connector with two (2) 4‑40 x
3/8” connector screws; secure the
module’s left side connector with two
(2) 4‑40 x 3/8” connector screws.
Torque the connector screws to
35 in.‑oz.