RJG Lynx ID7-M-SEQ, Product Manual

Page: 23 / 26

Product Manual | Lynx™ Shielded Sequence Module ID7‑M‑SEQ RJG, Inc. 17
RELATED PRODUCTS
The shielded sequence module is compatible
with other RJG, Inc. products for use with the
eDART process control and monitoring system.
COMPATIBLE PRODUCTS
SHIELDED SEQUENCE MODULE CABLE
C‑ID7‑M‑3M
The shielded sequence module cable
C‑ID7‑M‑3M (
1
at right ) cable features a metal
sheathing and shielding suited for the heat and
stress found in injection molding environments.
Designed specifically for use with RJG, Inc.’s
machine sequence module ID7‑M‑SEQ and the
e
DART System, the C‑ID7‑M‑3M provides a
connection from molding machines’ sequence
output card and the RJG, Inc. ID7‑M‑SEQ.
1
2
3
LYNX CABLES CE‑LX5
The Lynx sensor cable (
2
at right ) is a
polypropylene‑coated cable suited for the
heat and stress found in injection molding
environments. The cable is available in lengths
11.8–472.4” (0,3–12 m), and can be ordered
with straight or 90° fittings. One CE‑LX5 is
required to interface the ID7‑M‑SEQ with the
e
DART system.
eDART PROCESS CONTROLLER
The eDART process controller (
3
at right ) is
the base hardware unit for the eDART system.
The
eDART system is the most powerful process
control system in the industry, allowing molders
to stabilize and control injection molding
processes and contain bad parts, ensuring high
quality and cost‑reduction.