RJG Lynx ID7-M-SEQ, Product Manual

Page: 13 / 26

Product Manual | Lynx™ Shielded Sequence Module ID7‑M‑SEQ RJG, Inc. 7
INSTALLATION
INSTALLATION OVERVIEW
The shielded machine interface modules are
mounted to a solid surface, such as the machine
frame, inside the molding machine on a DIN
rail.
ID7‑M‑SEQ
The shielded machine sequence module cable
C‑ID7‑M‑3M is wired directly to the machine
(usually to an output card) on one end and
connected to the ID7‑M‑SEQ on the other
using the eight‑pin connector.
eDART CONNECTION
A Lynx cable CE‑LX5 is connected to the Lynx
port on the ID7‑M‑SEQ and a Lynx port on
the
eDART to provide it with the machine’s
sequence signals for process monitoring and
control calculations, along with the other
installed machine interface module signals.
C‑ID7‑M‑3M CABLE TO MACHINE
CE‑LX5 CABLE TO eDART