Riverbed Steelhead EX, Installation And Configuration Manual

Page: 48 / 78

42 Steelhead Appliance Installation and Configuration Guide
Installing and Configuring the Steelhead Appliance Configuring Out-of-Path Steelhead Appliances
The system confirms your settings:
You have entered the following information:
Step 1: Hostname? amnesiac
Step 2: Use DHCP on primary interface? no
Step 3: Primary IP address? 10.10.10.6
Step 4: Netmask? 255.255.0.0
Step 5: Default gateway? 10.0.0.1
Step 6: Primary DNS server? 10.0.0.2
Step 7: Domain name? example.com
Step 8: Admin password? xxxyyyy
Step 9: SMTP server? natoma
Step 10: Notification email address? example@example.com
Step 11: Set the primary interface speed? auto
Step 12: Set the primary interface duplex? auto
Step 13. Would you like to activate the in-path configuration: no
Step 14: Would you like to activate the out-of-path configuration? yes
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
The Steelhead appliance configuration wizard automatically saves your settings.
4. To log out of the system, enter the following command at the system prompt:
amnesiac> exit
Step 12: Set the primary interface
duplex? Enter the duplex mode on the primary
interface, and type a value at the
system prompt. Make sure that this
value matches the settings on your
router or switch. The default value is
auto.
Set the primary interface
duplex? [auto] auto
Step 13: Would you like to
activate the in-path
configuration? Enter
no
at the system prompt to
configure in-path support. An in-path
configuration is a configuration in
which the Steelhead appliance is in
the direct path of the client and server.
For detailed information about in-
path configurations, see the
Steelhead
Appliance Deployment Guide .
Would you like to activate the
in path configuration? no
Step 14: Would you like to
activate the out-of-path
configuration? Enter
yes
at the system prompt to
configure out-of-path support. An
out-of-path configuration is a
configuration in which the Steelhead
appliance is not in the direct path of
the client and server.
For detailed information about in-
path configurations, see the
Steelhead
Appliance Deployment Guide .
Would you like to activate the
out-of-path configuration? [no]
yes
Wizard Prompt Description Example