Steelhead Appliance Installation and Configuration Guide
29
Powering On the Steelhead Appliance
Installing and Configuring the Steelhead Appliance
Powering On the Steelhead Appliance
The following section describes how to connect the AC power and how to power on the system.
Caution:
In European electrical environments, you must ground (earth) the Green/Yellow tab on the power cord or risk
electrical shock.
To power on the system
1.
Ensure that the system power switch is in the off position on the rear of the Steelhead appliance.
2.
Plug the AC power cord into the Steelhead appliance.
Note:
If your model has multiple power supplies, you must plug in all the power cords or you will hear an alarm.
Figure 3-4. Connecting the AC Power
3.
Plug the AC power cord into an uninterrupted AC power source.
4.
Press the system power switch on.
If the Steelhead appliance does not immediately power on, press the power switch off, then press the
power switch on again.
5.
Check the status lights on the Steelhead appliance.
For detailed information about the status lights, see the appendix.
Note:
The 1U and 2U Steelhead EX appliances (Series xx60) take 15 minutes to start. The EX560 and EX760 take about
7 minutes to start.
