Riverbed SteelCentral AppResponse 2180, Upgrade And Maintenance Manual

Page: 17 / 82

Replacing 1U xx80 Components | 17
Replacing power supply units
3. Press in on the orange lever (see Figure 1-10 , letter B), and pull the power supply unit toward you (see
Figure 1-10 , letter C).
Figure 1-10. Removing the power supply unit from the 1U CX 3080 appliance
4. Slide the power supply unit out of the chassis.
Caution: Put the defective power supply unit aside; wait until it cools down before touching it.
5. Press in and hold the orange latch (see Figure 1-11 , letter A), and push the power supply into the
chassis (see Figure 1-11 , letter B).
Figure 1-11. Inserting the power supply unit for the 1U CX 3080 appliance
6. Press the lock handle down (see Figure 1-11 , letter C).
7. Plug the AC power cord into the new power supply unit.