![background image](http://html.mh-extra.com/html/riverbed/steelcentral-appresponse-2170/steelcentral-appresponse-2170_installation-manual_1465708124.webp)
124 | Network Card Status Lights for SteelHead GX, xx70, SteelCentral, Interceptor, and SteelFusion Core
Four-Port 1-GbE Copper Bypass card
This appendix assumes you have installed and configured the appliance. For details, see the installation
and configuration guide for your product.
Note:
The physical ports on the NICs are mapped in proximity to the PCI bus edge connector. The port closest to
the edge connector is L0, then W0, L1, and W1.
Note:
For details on status lights and cards in the EX560 and EX760 appliances, see the
Series EX560 and EX760
Systems Owner’s Manual
.
Four-Port 1-GbE Copper Bypass card
Two types of Four-Port 1-GbE Copper Bypass cards are available. Both types can be installed in the 1U
SteelHead CX 3070 and the 2U SteelHead CX 5070, SteelHead CX 7070 and the Interceptor 9600
appliances.
Type 2 cards are supported on the following software versions:
•
SteelHead versions: 8.6.0, 9.0.0, 9.1.0 and 9.2.0
•
Interceptor versions: 4.5.3, 5.5.0, and 5.0.1
Note:
The physical ports on the NICs are mapped in proximity to the PCI bus edge connector. The port closest to
the edge connector is L0, then W0, L1, followed by W1.
Figure B-1. Four-Port Copper Bypass Type 1 card (NIC-1-001G-4TX-BP)
Figure B-2. Four-Port Copper Bypass Type 2 card (NIC-1-001G-4TX-BP)
Port
Description
L0, W0, L1, W1
Provides access to 10/100/1000 Base-T
LED
Type 1 definitions
Type 2 definitions
LINK/ACT
Link = Green
Activity = Blinks green
Link = Green
Activity = Blinks green
BYP/DISC. SPD
1000 Mbps = Yellow
100 Mbps = Green
10 Mbps = Off
Bypass = Blinks green
Disconnect = Blinks yellow
—