![background image](http://html.mh-extra.com/html/riverbed/steelcentral-appresponse-2170/steelcentral-appresponse-2170_installation-manual_1465708105.webp)
Installing NICs for SteelHead Virtual Edition Appliances | 105
Configuring bypass cards for Hyper-V Server 2012 R2 and 2016
– From the command output, match the index in the command output with the driver found in
the Network Connections window.
shows the Ethernet (mgmt) driver having an index of 1.
Figure 6-6. Finding the index for the interface
8. Enter the following command at the command prompt, where <index> is the index number you
.
.\bpvmctl.exe -index <index> -r
Important:
Leave this command window open; it runs a process that is required for the SteelHead-v’s operation.
9. Add the suffixes A1, A2, A3, and A4 to the SteelHead-v MAC addresses using the Hyper-V user
interface.
The MAC addresses allocated by the SteelHead-v installation program have a suffix of A1, A2, A3, or
A4. The physical interface ports are mapped in two pairs. The left-most physical interfaces are LAN
and WAN pair 2 and map to suffixes A3 and A4. The right-most interfaces are LAN and WAN pair 1
and map to suffixes A1 and A2, as shown in this figure.
Figure 6-7. LAN pairs 1 and 2