30
2. Safety Instructions
PLEASE READ THROUGH AND FOLLOW THE USER
MANUAL AND THE SAFETY INSTRUCTIONS BEFORE
INSTALLING THE UNIT AND STARTING IT UP!
Transport
•
Please transport the UPS system only in the original packaging (to
protect against shock and impact).
Set-up
•
Condensation may occur if the UPS system is moved directly from
a cold to a warm environment. The UPS system must be absolutely
dry before being installed. Please allow an acclimatisation time of
at least two hours.
•
Do not install the UPS system near water or in damp environments.
•
Do not install the UPS system where it would be exposed to direct
sunlight or near heat.
•
Do not block off ventilation openings in the UPS system’s housing.
Installation
•
Please note the special installation aspects for the permanently
connected units Rittal PMC UPS 6kVA in Chapter 4 „Installation
and Start Up“.
•
The building wiring socket outlet (shockproof socket outlet) must
be easily accessible and close to the UPS system.
