36
Load and
battery
capacity
LED
1.
These LEDs signal the UPS system load if the
mains power is available (normal operation):
1st LED 1-35 %
2nd LED 35-55 %
3rd LED 55-75 %
4th LED 75-95 %
5th LED 95-100 %.
2.
In the case of battery operation, the LEDs indicate
the capacity of the batteries:
1st LED 1-35 %
2nd LED 35-55 %
3rd LED 55-75 %
4th LED 75-95 %
5th LED 95-100 %.
3.2 Back Panel
Slide buttons on the back panel allow selection of the outgoing
voltage of the UPS system. This can be changed only when the UPS
system is switched off.
Figure 2: Slide buttons to select output voltage.
