8
9.
Seal the enclosure at points indicated on positions 3, 4 (fig. 5.1.). Close the
safety cover and seal the enclosure at the point indicated at the position 6 (fig.
5.1).
10.
During construction works the installed signaling devices should be protected
from mechanical damages and ingress of construction materials (whitewash,
paints, cement kiln dust etc.).
12.
Maintenance and Safety Measures
During fire alarm system maintenance check signaling device operation on a regular
basis at least once every six months according to the following procedure:
1.
Confirm the device is operated in the standby mode, check the corresponding
indication (fig. 7.1.).
2.
Remove the seal from the point indicated at the position 6 (fig. 5.1).
3.
Open the transparent cover of the signaling device.
4.
Press the fire alarm button.
5.
Confirm the alarm appearance (fig. 7.1).
6.
Confirm the alarm remains after releasing the button.
7.
Using the extractor reset the button.
8.
Check the normal state of the indication (fig. 7.1).
All installation and maintenance activities applied to the device should be performed
by duly qualified personnel.
13.
Transportation and Storage
The device should be properly packed and transported in roofed vehicles. Storage
premises should be free of current-conducting dust, acid and alkaline fumes, corrosive
gases and gases harmful to insulation.
14.
Manufacturer’s Warranties
The manufacturer guarantees that the device complies to requirements of the
technical specifications provided to the client, ensures compliances to conditions of
transportation, storage, installation and operation.
Although
the warranty period
is 18 months from the commissioning date, it may not
exceed 24 months from the production date.
The
warranty storage period
is 12 months from the production date.
The manufacturer reserves the right for modification of the device in any way that
does not degrade its functional characteristics without prior notice.
15.
Information on Claims
In case of a device failure or defect during the warranty period, please fill in a
malfunction report specifying the dates of issue and commissioning of the device and
nature of the defect and submit it to the manufacturer.
