5
JMP1 + JMP3
Hardware configuration reset mode
JMP3
Radio channel test mode / standalone
mode
All jumpers removed
Standby mode
7.
Visual Indication
Fig. 7.1. Standby mode
t
Normal state
Alarm
green
green
green
Period 60 seconds
. . .
Red, 2 sec period – fire alarm
Red, 5 sec period – additional loop alarm
Red + green, 2 sec period – fire alarm + additional loop alarm
Fig. 7.2. Mode for adding to radio system
t
VD1
green
Red
Adding is in process
The device is
switched to the
mode for adding
to a radio system
t
The device is
successfully added to
the system
An active device is found.
It is ready to add the
signalling device
Blinks twice
Always on
Fig. 7.3. Hardw are configuration reset mode
t
red
5 times
The sensor resetting settings
red
red
red
red
red
The settings have been reset
to factory settings
Fig. 7.4. Radio channel test mode
t
green
green
green
+
red
green
+
red
The sensor sent the test
message but got no answer
The sensor sent the test
message and got the answer
