2
1.
General Information
The manual fire radio channel signaling device RIPR1 (hereinafter referred to as the
device) is designed for operation with control panels “Contact” as a fire alarm device.
When the button is pressed the device generates a fire alarm. Additionally the device
generates and sends to the receiver the following messages:
•
low battery signal;
•
enclosure break-in alarm.
Receiving these signals by the radio channel receiver “RDK1” changes states of
receiver outputs for a short time (2 sec).
Receiving a signal from the signaling device by control panels causes the panel to
generate an alarm.
2.
Manufacturer
195248, Energetikov avenue, building 30, block 8,
St Petersburg, Russia
Tel.: +7 911 795 02 02
3.
Package Contents
Device
1 pc
Jumper 2.54mm
2 pc
MF-
25 resistor 0.25W 270 Ω
1 pc
Battery 3.6V ER14505 (AA)
1 pc
Fastening kit
1 pc
Data sheet
1 pc
Package
1 pc
