ritm Contact GSM-9?, Operating Manual

Page: 8 / 93

www.ritm.ru
8 of 93
Operating Manual. Contact GSM-9N /А/М
Tamper
The tamper button triggers on removal the panel cover or tearing-off the
enclosure from the installation surface and generates an alarm message to
send it to the monitoring server or to a user as an SMS.
Device Setup using PC
You can connect and setup the panel using any of the following ways:
1. Remotely using GEO.RITM and RITM-Link cloud software
2. Locally by connecting to the device through a
configuration cable and using Ritm.conf and Ritm
Configure multiuse configuration software
3. Remotely using CSD-modem
Partial panel setup without using PC
1
The “Contact GSM-9N” panel could be partly setup in standalone mode. In
this case the setup is performed with a built-in keypad. Commands for
device setup with a keypad are listed in the “Standalone setup” section.
Touch Memory keys and RFID-tags
2
To arm a facility Touch Memory keys could be used and for the “Contact
GSM-9M” version could be used RFID-tags as an option. This requires
installation of the proper reading devices connected to the panel.
16 keys/tags may be used at the same time.
1) Available for “ Contact GSM-9N ” version.
2) The “
Contact GSM-9M
” version could be delivered with a built-in Touch Memory key
reader or a RFID reader.