ritm Contact GSM-9?, Operating Manual

Page: 74 / 93

www.ritm.ru
74 of 93
Operating Manual. Contact GSM-9N /А/М
Engineering Numbers
Engineering numbers are used to indicate a list of people who have access
to the configuration of the panel via a CSD connection (GSM network).
This section (fig. 30) shows phone numbers from the white list. These
numbers can be used for connecting and configuring the equipment.
i
Setup through a CSD connection is enabled only with
designated equipment (modems) and configuration software.
If the box Turn on the engineer’s numbers is not checked the configuration
may be done using any phone number.
To enable configuring of the panel from specific engineering phone
numbers only fill in the blank fields in this section in the format used by
the communications provider. For eХХХХХХХХХХХ and check
Turn on the engineer’s numbers
.
To find out the format that the operator is using for
phone number transmission, remove the SIM card from
the panel, insert it into a mobile phone and call that
number from an engineering number. The incoming call
number will be indicated on the mobile phone screen.
i
To disable remote configuration via a CSD
connection, leave the phone fields blank and check
the box
Turn on the engineer’ s numbers.
i
If the number is not detected, the panel will take the call for
2 seconds, after which the connection will be terminated.