ritm Contact GSM-9?, Operating Manual

Page: 54 / 93

www.ritm.ru
54 of 93
Operating Manual. Contact GSM-9N /А/М
Transferred event number limits
Set the
Limited event quantity per area
to block unnecessary messages to
the monitoring software. This operation is useful to save data traffic.
For example after a guarded area has been breached through
a broken window (sensor 1) the intruder moves along the
room thus triggering a motion sensor (sensor 2). Since
the alarm has already been transferred, the information
about the intruder moving through the breached zone is no
longer relevant and is not necessary to be transmitted.
i
This does not involve system events.
After area disarming the counter resets.
If there are no need to limit the number of generated events set the value
to No limitations .
Arming without connection to the server
Allow arming if no connection to the server
• The checkbox is selected - arming areas regardless connection
to the monitoring software servers is enabled;
• The checkbox is cleared - when trying to arm an area, a check of the
first direction of communication channels (Online channels,
switched with OR) state will be made. The check is performed by
sending a test message (with
this an event "602.1 — Periodic test report" is generated).
If the test message was not sent by checking channels,
then an event "450.3 — Exception close" will be
generated and this area will not be armed.
i
While checking channels, connected to the output OK1
actuation device will blink 1 time per second.