ritm Contact GSM-9?, Operating Manual

Page: 26 / 93

www.ritm.ru
26 of 93
Operating Manual. Contact GSM-9N /А/М
Standalone configuration
4
The “Contact GSM-9N” panel could be partly configured using the built-in
keypad and without logging to the configuration software. To configure the
device use special commands.
The following commands are available:
Designation Command
Configuration
code switching
<configuration code>
#0#
<new configuration code>
*
For example: 1234#0#4321*
Object number
switching
<configuration code> #1# <object number> *
For example: 1234#1#0050*
GSM signal
strength check
<configuration code> #2*
Upon entering a command device indicators 1-5 lights up.
Indication designation is the following: the indicator 1 is on
- the signal strength is 20%, the indicators 1 and 2 are on - the
signal strength is 40%, the indicators 1, 2 and 3 - the signal
strength is 60%, the indicators 1, 2, 3 an 4 - the signal strength
is 80%, the indicators 1, 2, 3, 4, 5 - the signal strength is 100%.
Adding code
for arming and
disarming
<configuration code> #3# <security code>< D > # < A >*
where: security code - a code for arming and disarming
an area; D - duresse (0 - under no duress, 1 - under
duress); A - numbers of arming areas (from 1 to 6).
For example: 1234#3#11110#123456*
In this example to arm areas 1, 2, 3, 4, 5 and 6
under no duress the 1111 code is added.
4) Available for “ Contact GSM-9N ” version only.