ritm Contact GSM-9?, Operating Manual

Page: 17 / 93

www.ritm.ru
17 of 93
Operating Manual. Contact GSM-9N /А/М
# Part Designation
1 LEDs Device indication is described in the section "Indication"
2 Blank plug A mounting hole designed for cable inlet/outlet
3
Touch Memory
reader
ТМ reader built in the enclosure (optionally,
depending on the version)
4
GSM antenna
connector
External GSM antenna connector
5 SIM card slots Vertical slots for SIM cards
6
Configuration
cable connector
Configuration cable connector for PC communication
7 RFID reader
RFID reader built in the enclosure (optionally,
depending on the version)
8 Spring contacts
Spring contacts are connected to the indication
board (on the top cover of the enclosure).
9 Battery location Backup battery compartment
+1-; +2-; +3- Connectors for hardwired zones connection
ОК1, ОК2, Uok
Connectors for actuation devices. The ОК1, ОК2 terminals
are negative and the Uok terminal is positive for devices.
TM, LED, GND
Terminals for Touch Memory reader connection:
• TM — output (positive) for connecting
Touch Memory signaling wire
• LED — output (positive) for connecting
Touch Memory indicator wire
• GND: Common.
+BAT-
Lead-acid battery connector The «–» terminal is negative
and the «+» terminal is positive for the battery.
220V 50Hz 220V power supply connector