Riso ComColorExpress IS700C, Setup Manual

Page: 55 / 68

Setting Up the Optional Touch Panel Display
Touch Panel Screen
53
Touch Panel Screen
Touch Panel Calibration Screen
After configuring settings for the IS700C network (or resetting the IS700C) and booting the IS700C, the Touch Panel
Calibration Screen will appear.
At the Touch Panel Calibration Screen, you can calibrate the Touch Panel Display with the touched position by touch-
ing the
at the screen.
Touch Panel Calibration Screen
Important!:
• The is displayed three times (in three positions). Ensure that you touch the centre of the . The Touch Panel
Display will not properly function in the future if you touch a position other than the .
• If you fail to calibrate the touched position correctly, you can display the Touch Panel Calibration Screen on the
Touch Panel Display by entering http:// (Controller’s IP address) /tp_calibrate.php into the address bar of your web
browser. When the Touch Panel Calibration Screen appears, calibrate the touched position correctly.
Note:
• Once the touch position calibration has been performed, it remains effective until the IS700C is returned to its fac-
tory default settings or is reset, and when booting the IS700C in the future, the Start menu screen will appear.
“Rear side”
) p.14, “Start Menu Screen” ) p.54
• It is also possible to conduct touch position calibration from the Touch Panel menu. For details about calibrating the
touched position, refer to the separate manual, “ComColorExpress IS700C Utility Guide”.