Riso ComColorExpress IS700C, Setup Manual

Page: 44 / 68

Setup and Installation of the ComColorExpress IS700C
Installing on Windows (Windows 2000/XP/Windows Server 2003)
42
5
Select the queues you want to
install, and click the [Next] button.
Note:
• [Normal] queue (e.g. IS700C-Normal)
Output document data is processed in order on
the printer.
• [Hold] queue (e.g. IS700C-Hold)
Output document data is saved in the IS700C.
Saved data is processed by giving commands
with the RISO Console or optional Touch Panel
Display.
• Custom queue (e.g. IS700C-ABC)
If the administrator has registered custom
queues in the IS700C, queues that have been
already registered will be displayed in the
queue selection list. Output document data is
processed in accordance with the queue set-
tings registered by the administrator.
For details, refer to the separate manual, “Com-
ColorExpress IS700C Utility Guide”.
6
Select the printer name, and click
the [Next] button.
Note:
• If the manufacturer and the printer model are
not displayed, click the [Have Disk] button, and
on the folder indicated as the installation desti-
nation in step 6 of “Installing the RISO IS700C
Software”, open the Driver folder inside the
RISO IS700C folder, and select Setup.inf.
“Installing the RISO IS700C Software”
) p.37
• If another IS700C printer driver has already
been installed, the [Existing driver] dialog box
will be displayed.
In this case, select
[Replace existing driver] ,
and replace the existing driver with the new
driver.
7
Click the [Finish] button.
When the dialog box below is displayed, click the
[Finish] button, and close the wizard.
Important!:
• If the “Windows Logo testing” dialog box (for
Windows XP or Windows 2003 Server) or the
“Digital Signature Not Found” dialog box (for
Windows 2000) is displayed, continue with the
installation process.