Riso ComColorExpress IS700C, Setup Manual

Page: 13 / 68

Notice about Safety and Handling (Uk)
Before Starting to Use
11
Before Starting to Use
This section explains precautions that need to be observed when using the unit.
Installation Locations
Note the following items.
• The Location for Installation is determined based on consultations with the customer at the time of delivery.
• Avoid installing the unit in the locations listed below. Failure to observe this precaution may lead to unit
failure or human injury.
– Locations that are subject to direct sunlight or bright locations that are close to windows. (If there is no
other choice, curtain the window.)
– Locations that are subject to sudden temperature change.
– Extremely hot and humid locations or cold and dry locations
– Heated locations or locations exposed to direct cold air, direct hot air, or direct radiant heat
– Badly ventilated locations
– Dusty locations
– Locations that are subject to frequent vibration
Handling
• Do not turn off the Main Power Switch or unplug the electrical (power) cord forcedly during operation.
• The unit contains precision parts and must not be handled in ways other than those stipulated in this manual.
• Do not place heavy objects on or apply shocks to the unit.
• Wait at least ten seconds between switching off the power supply and switching it on again.
• When connected or disconnecting a cable to a peripheral device, ensure that the power of this unit is off and unplug
the electrical (power) cord in advance.
• When moving this unit, turn off the power and unplug the electrical (power) cord in advance.
• Do not use cellular phones, microcellular phones or pagers near the unit because malfunction due to radio wave
might occur. Turn off all cellular phones, microcellular phones and pagers in the vicinity of the unit.
• Sudden temperature changes may result in condensation building up inside the unit, resulting in failure. when this
unit is moved from a cold outside location to inside a warm room, dew condensation occurs easily. Leave the unit
for a while to adapt to the temperature before using it.
• Momentary voltage drops in the power supply may result in malfunctions. To avoid this, always use an AC Unin-
terruptible Power Supply or similar protective system.
Operation Environment
• Appropriate environment conditions are shown below.
Temperature range: 5 - 35 ° C (41 ° F - 86 ° F)
Humidity range: 20 - 80% (noncondensing)