Riso ComColorExpress IS700C, Setup Manual

Page: 11 / 68

Notice about Safety and Handling (Uk)
Safety Precautions
9
B
Caution:
• Connect the power cord and the interface cables securely. Loose connections may cause contact failures and
result in the outbreak of fire.
• Do not use a damaged power cord. Replace the damaged power cord with a power cord that meets the same spec-
ifications. For replacement, contact your service representative.
• Do not pull the power cord when unplugging it. Failure to observe this may result in damage leading to the outbreak
of fire or electric shocks. Be sure to hold securely onto the plug when unplugging it.
• If the unit is not used for a long time, for example due to consecutive holidays, unplug the power cord from the elec-
trical outlet for safety.
• Pull out the power plug from the electrical outlet more than once a year and clean the prongs of the plug and their
surroundings. Dust accumulating in these areas may result in the outbreak of fire.
Interface Cable Connection
B
Caution:
• Always use interface cables specified by RISO KAGAKU CORPORATION and ensure that they are connected to
the correct devices with the correct connectors. Failure to observe this may result in the outbreak of fire.
• Do not damage or tread on interface cables. Do not place heavy objects on the cables or operate the system with
loose connections. Failure to observe this may result in the outbreak of fire.
Handling
A
WARNING:
• Do not place containers containing water or other liquids or metallic objects on top of the unit. Any foreign matter
entering the unit may result in the outbreak of fire or electric shocks.
• Do not place candles are any other naked flame near the unit.
• Do not insert or drop any metallic material or flammable substances into the unit through any opening. Failure to
observe this may result in the outbreak of fire or electric shocks.
• Do not remove the covers. Failure to observe this may result in electric shocks from high-voltage parts.
• Do not dismantle or modify the unit. Failure to observe this may result in the outbreak of fire or electric
shocks.
• If the unit emits excessive heat, smoke or foul odors, immediately turn off the power, unplug the electrical
(power) cord and contact your service representative to prevent the risk of fire and electric shocks.
• If something drops inside the unit, immediately turn off the Main Power Switch, unplug the electrical
(power) cord and contact your service representative. Failure to observe this may result in the outbreak
of fire or electric shocks.
• Do not remove the lithium battery from inside the unit. Placing the lithium battery near fire or in water might
cause explosions.
If the unit does not operate correctly due to the depletion of the lithium battery, contact your service rep-
resentative.
B
Caution:
• When moving the unit, unplug the electrical (power) cord and remove any connected cables. when holding the bot-
tom of the unit with your hands, take sufficient care not to get your fingers, your feet, and any cables caught by the
unit.
• If a lightning strike seems imminent, unplug the electrical (power) cord. If the sound of thunder is heard
before the plug can be disconnected, do not touch the unit or the cables under any circumstances. Failure
to observe this may result in the outbreak of fire or electric shocks.