Rishabh RISH LM 1340, Operating Manual

Page: 9 / 106

RS485 Connection Indication
Digital Input Indication
Digital Output Indication
It indicates that the serial communication between the instrument and the
computer / control / automation system is activated through the RS485 output of the instrument by
glowing continuously. In case the communication is not active, the indication is not shown.
DI1 is configured in Status Mode and is present.
DO1 is energized.
The Digital Input (DI) symbols indicate the following :
These symbols indicate the following :
Tariff Energies Indication
This Instrument comes with 2 tariff based on Digital Input 1 (DI1) for 6
selectable energies each. In the image given here, it indicates that the
instrument is currently displaying the selected energy parameter (System
Import Active Energy) of Tariff 2. Refer TABLE 1.2 for navigation of Tariff
Energies. These energies are available in Energy Parameter Screens on
display.
XX XX XX XX
1. Status of external contacts when DI is configured in Status Mode.
DI1 is configured in Status Mode and is absent.
DI2 is configured for measurement of external pulses.
2. DI is configured for Pulse Mode.
1. Status of the output contacts (Relay).
DO1 is de-energized.
DO1 is configured for Pulse Output.
2. Relay is selected in Pulse Mode.
7