Rishabh RISH LM 1340, Operating Manual

Page: 57 / 106

Press “ ” key, prompt for the first digit.
Press the “ ” and “ ” keys to scroll the values of the first digit.
Press the “ ” key to advance to next digit.
Similarly, enter second, third and fourth digits also.
After the fourth digit is entered, pressing “ ” key sets the value and
advances to “Limit Output ON Delay” screen (see Section 3.2.5.1.1.2.8).
The value of ON Delay can be set between
1 and 9999
seconds
.
Note: Default value is set to ‘1’ second.
XX XX XX XX
ON Delay Edit Mode
Pressing “ ” key prompts for first digit.
Press the “ ” and “ ” key to scroll the value of the first digit.
Press the “ ” key to advance to second digit.
The second digit prompts. Press “ ” and “ ” keys to scroll through 0
and 9 and “ ” key to set the digit and advance to the third digit.
The third digit prompts. Press “ ” and “ ” keys to scroll through0 and 9
and “ ” key to set the digit and advance to the fourth digit.
Press “ ” and “ ” keys to scroll through 0 and 9.
Press “ ” key to confirm the value and advance to “Limit Output OFF
Delay” screen (see Section 3.2.5.1.1.2.9).
3.2.5.1.1.2.9 Limit Output OFF Delay
This screen allows the user to set OFF Delay time in
seconds
for Relay Limit Assigned Parameters.
Pressing “ ” key accepts the present value and takes user to “Quit Limit
Output” menu (See section 3.2.5.1.1.1.2.10).
Similarly, pressing “ ” key accepts the present value and takes user to
“Limit Output ON Delay” menu (See section 3.2.5.1.1.1.2.8).
Pressing the “ ” key advances to “OFF Delay” Edit mode.
The value of OFF Delay can be set between
1 and 9999
seconds.
Note: Default value is set to ‘1’ second.
XX XX XX XX
XX XX XX XX
OFF Delay Edit Mode
55