3. Setup Screen
Upon pressing both Up and Down keys simultaneously for 3 sec "Cod" screen
is displayed. Entering of correct code scrolls all programmable parameters.
Key function which common to all parameters are explained below
L1
L2
L3
V
x1000
LAG
LEAD
PF
Editing of digits ( Setting value )
Upon display of setup parameter label pressing key enter into setup
and present value is shown. Pressing key the Most significant digit
( first digit from left ) starts blinking, pressing key increases in digit
value pressing key confirms digit and move to next digit editing till 3rd
digit. After all three digits programmed as desired pressing key results in
confirmation of value and display shows "SET", Pressing key scroll to
next parameter.
In some of cases instead of digits
label option need to be set
Code ( Password )
The Screen shown is used for
authentication purpose. Pressing of
key allows user to enter password
here. correct password results
in setup parameter editing else PFC
will show "Err" message and exit to
the measurement screen.
default code is 000. and cannot be
changed.
x1000
LAG
LEAD
PF
6