3.7 Number of Banks Setting:
The Screen displays "Cnt" followed by
previously set Number of Banks count.
Pressing the will enter to edit number
of capacitor banks count. The range of
setting is depending on orderd instrument
or previously detected in auto init function.
Maximum value is 8.
Select value using key and for Setting the same
press the key. This screen is not shown if auto mode is selected.
After Setting the Number of banks count ,Press key to move to capacitor
bank kvar Value Setting.
3.8 Capacitor Bank kvar Value Selection:
The Screen displays "CAP". Pressing the
key will enter to edit kvar value of capacitor
bank. The Screen will display "C01" followed
by its kvar value. the range of value is 1 to
to 250. if control series is 1 to 9 then only
C01 screen shown and next capacitor bank
screens not shown. For control series
U
all
bank screen C01...C0n
are shown and value
can be set as per bank count set previously.
Sideby is screen for bank 1 with 25 kvar value.
L1
L2
L3
V
x1000
LAG
LEAD
PF
L1
L2
L3
V
x1000
LAG
LEAD
PF
The Control Series Selection will act as an Multiplier for the Capacitor Banks.
Selecting the Control Series 1 will select multiplier {1,1,1,1,1,1,1,1} for
Capacitor Bank 1 to 8 depending on number of outputs.
After Setting the Series Press key to move to Number of Banks Selection.
12
