Chapter 4 BIOS Setup
R860
37
4.9 PnP / PCI Configurations
Phoenix – AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
Item Help
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
[Disabled]
[Auto (ESCD)]
[Press Enter]
[Disabled]
Menu Level
►
Default is Disabled. Select Enabled
to reset Extended System
Configuration Data ESCD) when
you exit Setup if you have installed
a new add-on and the system
reconfiguration has caused such a
serious conflict that the OS cannot
boot
↑↓→←
: Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Values F6 : Fail-Safe Defaults F7 : Optimized Defaults
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data
(ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the operating system can not boot.
Enabled, Disabled (default)
Resources Controlled By
The Award Plug and play BIOS has the capacity to automatically configure all of the boot and Plug and
Play compatible devices. However, this capability means absolutely nothing unless you are using a Plug
and Play operating system such as Windows 98/95/NT. If you set this field to “manual” choose specific
resources by going into each of the sub menu that follows this field.
Manual
Resources controlled by the user.
Auto (ESCD) (default)
Resources controlled by BIOS automatically
IRQ Resources :
Press Enter (When Resources Controlled By = Manual)
IRQ3, 4, 5, 7, 9, 10, 11, 12, 14, 15 PCI Device / Reserved.
PCI /VGA Palette Snoop
This field controls the ability of a primary PCI graphics controller to share a common palette with an
ISA/VESA video or MPEG card.
Enabled
PCI VGA co-works with ISA MPEG card
Disabled (default)
All cases except above
