Chapter 4 BIOS Setup
R860
20
Using BIOS setup program
Up
↑
Move to the previous field
Down
↓
Move to the next field
Left
←
Move to the field on the left hand side
Right
→
Move to the field on the right hand side
<ESC>
Quit from setup program without saving changes,
or Exit from current menu page and return to
main menu page
<Page Up> or <+>
Select the previous value for a field
<Page Down> or <->
Select the next value for a field
<F1>
General Help
<F2>
Item Help
<F5>
Previous Values
<F6>
Fail-Safe Defaults
<F7>
Optimized Defaults.
<F10>
Save the current value and exit setup program
If the system is no longer able to boot after changing the settings, the only way to recover it is
to clear the data stored in RTC CMOS. To reset the RTC CMOS data, take the
JP1
jumper cap
off pins 2-3 place onto pins 1-2, and then place back onto pins 2-3 again. This will return the
RTC to the default setting. Then, get into the BIOS setup program, choose Load Fail-Safe
Defaults ; Load Optimized Defaults, and select the original manufacturer default settings in you
CMOS.
