7
Figure 5
Figure 6
Figure 7
3.
Using the mounting holes as a template, secure the mounting bracket to the
mounting surface (
see Figure 7
).
4.
Open the battery compartment cover (
see Figure 8
).
Figure 8
5.
Place the batteries into the battery holder while observing polarity.
6.
Connect the battery cable to the battery connector
7.
Insert the battery holder in the battery compartment and close the battery
compartment cover.
8.
Configure the detector (
see Configuring the detector
).
9.
To Install the detector on the mounting bracket, align the base rib with the
bracket rib, insert the base hooks into the bracket cavities and then turn the
detector clockwise (
see Figure 9
).
Battery Compartment
Tamper
Battery Holder
