Compartment door
For easy access, all components in Urban Lite Spas
are positioned on the same side as the compartment
door. In the event that an engineer needs to get
inside your spa all that is needed is to pull away the
steps and open the cabinet.
Clean Cycle
At the beginning of the filtration cycle, a pump will
automatically operate for 1 minute to clean the spa water.
Circulation pump
The circulation pump operates during filtration and
when the heater is in operation.
Ozone generator
The ozone generator will operate during filtration cycles.
Install optional hand held massage jet
See manual pages 3 & 4 to identify the hand held
massage jet fitting. Using two hands, unscrew the jet
fitting anti clockwise and remove. Connect hand held
massage jet to jet fitting and install by turning clockwise.
15
FUNCTIONS
Jets
Press the Jets button once to turn the pump
on or off. if left running the pumps will turn off
after a time-out period.
light
Press the Light button to turn on the LED
lighting. Press the button once again to turn it off.
Lighting in-spa and water edge LED lighting has
seven colour and three sequencing options including
a gentle rotation through the spectrum. Using the key
pad you can permanently select your favourite colour.
Bar top Controls
By turning Diverter Control you can divert the water
current between the different spa jets. You can also
adjust the Air Control to allow more air to join the spa
water, creating a stronger massage.
diverter Control
85mm
(Largest control on spa)
air Control
65mm
(Smallest control on spa)
Hand Held Massage
Jet Control
75mm
(Middle size control
on spa)
freeze protection
if the sensors within the heater detect a very low
temperature, the pumps and blower automatically
activate to provide freeze protection. The pumps and
blower will run continuously or periodically depending
on the conditions.
