CONTROL PANEL OPERATIONS
10
water Care
The Water Care section will help you
set up your ideal filtration and heating
settings. Choose from Away, Beginner,
Energy Savings, Super Energy Savings,
and Weekender, depending on your
need. Use Light key to choose your
setting. A checkmark will appear on the
selected icon to confirm.
in Economy mode, the set point will be
reduced by 20°F*, which means that the
heating system will not be engaged
unless the temperature falls to 20°F
below the spa’s set temperature.
* Default value
water Care modes
Away from home: in this mode the spa will always be
in economy; the set point will be reduced by 20° F*.
Beginner: The spa will never be in economy mode,
and will run a normal 8 hours of filtration a day.
Energy Savings: The spa will be in economy mode
during the peak hours of the day and resume
normal mode on the weekend*.
Super Energy Savings: The spa will always be in
economy mode during peak hours, every day of the
week*.
Weekender: The spa will be in economy mode
from Monday to Friday, and will run normally on the
weekend*.
*Filtration will be reduced when the economy mode is active.
Light
Settings
Mode
Jets 1
Jets 2
Modifying schedules
To see and/or modify a Water Care
category, use the lit button to the right
(Jets 1) to open the selected Water Care
menu.
Use the arrow keys to choose a schedule
to modify (choice of economy and
filtration schedules). Use the Light key to
move between parameters.
You have several possibilities for the
schedule (Mon-Fri, weekend, every day, or
single days). The schedules will be repeated
every week. The time and duration are set
in 30 minute increments. Once you have set
the schedule, use Jet 1 to go back. Ensure
that you have selected the desired Water
Care option in the main Water Care menu.
The filtration schedule shown on the
screen will apply to the main filtration
pump, most likely pump 1. if your spa uses
a circulation pump configured to run 24
hours, the screen will show you the purge
setting instead of filtration. The purges are
pre-programmed for a fixed number of
minutes, therefore the duration will be set
to N/A on the screen, and only the start
time can be modified.
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
11
