Bluetooth audio
The keypad can be used with the
in.stream 2 audio system. The in.stream
2 Settings menu gives you a Source
selector, a Bluetooth disconnect option,
an On/Off switch and an audio control
on fader, balance and subwoofer. For
more information on audio functions,
see the in.stream 2 operation section.
The in.stream 2 is automatically
detected at power-up.
Maintenance
From the Settings page you can access
the Maintenance menu, which gives
you access to the following options:
• Maintenance reminders
• Standby
Use the Up and Down keys to make a
selection, and Light key to confirm.
Maintenance reminders
The keypad will remind you of
maintenance required on your spa, like
rinsing or cleaning the filter. Each task has
its own duration, based on normal use.
The Maintenance reminders menu
allows you to verify the time left before
maintenance is required, as well as to
reset the time once a task is completed.
Use the Up and Down keys to move
through the list.
To reset a task select it by pressing
Light key, then confirm when prompted.
Once you have confirmed the task will
be reset.
standby
The Standby mode allows you to
service your spa. Pumps will stop for 30
minutes, and automatically restart after
this time.
Once Standby mode has been
activated a screen will appear to show
that the pumps have stopped. The
normal spa page will return at the end
of maintenance.
Press Jet 1 to leave Standby mode and
restart the spa.
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
CONTROL PANEL OPERATIONS
11
