7
iN-GROuNd iNSTallaTiON
Once installed, pool maintenance including adding
chemicals and filter cleaning and replacement can be
carried out by the pool side. all the pool components
can be accessed via the service hatch.
unless something stops functioning you can carry
out maintenance from the pool side, but in the event
of a breakdown an engineer can simply lift off the
waterproof end cover and drop down through the
service hatch to repair or replace as needed.
the only consideration here is that your electrician
will need to supply a suitable cable with a waterproof
gland to pass through the fiberglass wall into the
service area.
the best option is for the install team to drill the hole
as high as possible at the time of installation and feed
the power cable through via the waterproof gland and
then directly into the control box. in some countries
only certified electricians can make the final electrical
connection so please check with your dealer.
electrical power supply
access point options
Pit: 7m x 3.3m
