CONTROl paNEl OpERaTiONS
1
water care
The Water care page will help you set up your ideal filtration and heating settings.The Water care page
will help you set up your ideal filtration and heating settings. Choose, set or modify one of the
5 suggested modes depending on your needs at any given time.
Away from home
In this mode the
spa will always be in
economy; the set point
will be reduced
by 20° F.
Beginner
The spa will never be
in economy mode
and will be filtering
according to the pack's
low level configuration.
Energy Savings
The spa will be in
economy mode during
the peak hours of
the day and resume
normal mode on
the weekend.
Super Energy
The spa will always
be in economy mode
during peak hours,
every day of the week.
Weekender
The spa will be in
economy mode from
Monday to Friday, and
will run normally on
the weekend.
modifying water care schedules
water care
To modify a Water care category, touch the pen
icon at the right end of the desired water care to
open the selected Water Care menu.
In Economy mode, the set point will be reduced
by 20°F, which means that the heating system
will not be engaged unless the temperature falls to
20°F below the spa's set temperature.
The filtration schedule show on the screen will be
applied to the main filtration pump, most likely
pump 1. If your spa uses a circulation pump
configured to run 24 hours, the screen will show
you the purge setting instead of filtration.
The purges are pre-programmed for a fix number
of minutes, therefore the duration will be set to
N/A on the screen, and only the start time can be
modified.
economy
Touch the Economy tab to change the economy
schedule. You can add economy schedules by
touching the « + » symbol .
To delete a schedule, touch the garbage can icon
at the right end of the desired line.
You can modify the programmed schedules by
selecting one and adjusting the schedule.
You have several possibilities for the schedule
(Mon-Fri, weekend, every day, or single days).
The schedules will be repeated every week.
The time and duration are set in 30 minute
increments.
purges
Touch the Purge tab to change the purge
settings. You can add purges by touching the
« + » symbol.
To delete a schedule, touch the garbage can icon
at the right end of the desired line.
filter cycles
Touch the Filter cycle tab to change the filter
cycle schedules. You can add filtration schedules
by touching the « + » symbol .
To delete a schedule, touch the garbage can icon
at the right end of the desired line.
Once you have set the schedule, use the calendar
icon to go back.
You can modify the programmed purges by
selecting one and adjusting the schedule.
You have several possibilities for the schedule
(Mon-Fri, weekend, every day, or single days).
The schedules will be repeated every week.
The time and duration are set in 30 minute
increments. Once you have set the purge,
use the calendar icon to go back.
15
