6
OPERATING INSTRUCTIONS
To set or change the time...
1. Make sure your watch is completely dry;
2. Unscrew the crown (as described above);
3. Pull the crown out fully to point C;
4. Turn the hands to the exact time;
5. Push the crown back in to point A;
6. Fully screw in crown (as described above).
To set or change the date...
1. Make sure your watch is completely dry;
2. Unscrew the crown (as described above);
3. Pull the crown out to point B;
4. Turn crown clockwise/away from you to the current date;
5. Push crown back in to point A;
6. Fully screw in crown (as described above).
(The Date will automatically change each day at 12 midnight.)
MOONPHASE (Only available on tidemaster styles)
No setting is required as the moon phase dial is factory preset to your area. If
minor adjustment is required please follow these instructions.
To set or change the Moon Phase...
1. Make sure your watch is completely dry;
2. Unscrew the crown (as described above);
3. Pull the crown out fully to point C;
4. Continuously turn the crown anti-clockwise / towards you until the moon symbol
appears in the window. Keep winding until the small black marker on the moon
lines up with the estimated current moon phase day on the markers above the
window (for full moon setting, the marker 15);
5. Set hands to the correct time;
6. Push crown back in to point B (half way);
7. Turn the crown clockwise/away from you to set the date to the correct day;
8. Fully screw in crown to point A (as described in Screw Crown section).
The moon phase will automatically advance daily.
Note:
To maintain accurate moon tracking over long periods, small adjustments
may need to made to your moon phase.
