To recall previous lap memory push the LIGHT button
while the Chronograph is stopped. Push the LIGHT
button again and next lap will display. Push START/
STOP or LAP/RESET button to exit and go back to the
Chronograph screen.
Notes: 1. To view the current time and date, while the Chronograph is run-
ning, simply press the MODE button 3 times. The Normal Time screen will
appear and the ( ) symbol will flash to show that the Chronograph is
still running.
2. If there is no key operation for 30 seconds, The Chronograph
screen will be exit and returned to Normal Time screen automatically.
3. The Chronograph screen will display the accumulated time in
Minutes, Seconds and 1/100 Seconds until the accumulated time is less than
1 hour, after which the screen will display Hours, Minutes and Seconds.
4. There are total of 10 lap memories. Lap L will be shown if lap
number is larger than 9. The last lap memory will be overwritten by the
latest lap whereas the first 9 laps will be kept unchanged.
[ ] Timer Mode:
There are 3 modes of timer: ( ) Count Down-
Stop, ( ) Count Down-Repeat or ( )
Count Down- and Up, each with a preset value up to 23
hrs, 59 min, 59 sec.
In ( ) Modes, simply push the START/STOP
to commence and stop the Timer. Then push the LAP/
RESET to reset to the preset value while the timer is
stopped. Note that the ( ) symbol will appear on
Count Down - and Up Timer mode only. When the Count
Up is running the ( ) symbol will flash.
Notes: 1. To view the current time and date, while the Timer is running, simply
press the MODE button 2 times. The Normal Time screen will appear and
the ( ) symbol will show that the Timer is still running.
2. If there is no key operation for 30 seconds, the Timer screen will
36
