Rip curl Trestles Tide Watch Instruction Bulletin Download Page 27 | Manualshive

Page: 27 / 73

background image

27

• Push START/STOP the Minutes will flash, advance the Minutes of your
chosen HIGH TIDE with LAP/RESET till correct.
• When all new settings are done, you must push the MODE button to save
the information, which then leaves you in the FT mode, so push the MODE
button three times more to return to NT mode. The watch will automatically
compute the HIGH TIDE information you have programmed to that of the TIDE
conditions of today. This is of course as long as you have already programmed
today’s Year, Month, Date and time correctly.

FT SETTING FUTURE TIDE :

• From NT mode push the MODE button four times.
• FT is displayed in the fifth box from the left, Month,
Date, Hour and Year are displayed.
• Advanced the Year with LAP/RESET till correct. (For
quick advance hold in the LAP/RESET button)
• Push START/STOP the Month will flash, advance the
Month with LAP/RESET till correct.
• Push START/STOP the Date will flash, advance the Date with LAP/RESET
till correct.
• Push START/STOP the Hour will flash, advance the Hour with LAP/RESET
to see the Tide conditions for selected Month, Date by Hour.

When finished just push the MODE button three times to return to NT mode.

DT SETTING DUAL TIME :

• From NT mode push the MODE button five times.
• DT is displayed in the sixth box from the left: Month,
Date, Hour and Seconds are displayed.
• Hold down MODE for 3 seconds till “SET” appears in the
top right corner. The Year will appear and be flashing.
• Advance the Year with LAP/RESET till correct. (For
quick advance hold in the LAP/RESET button)
• Push START/STOP the Month will flash, advance Month with LAP/RESET
till correct.
• Push START/STOP the Date will flash, advance the Date with LAP/RESET
till correct.

«
...
25
26
27
28
29
...
»

Summary of Contents for Trestles Tide Watch










































































Reviews:

No comments

Related manuals for Trestles Tide Watch

Brand: EARNSHAW Pages: 7

Brand: Jaquet Droz Pages: 37

Brand: Japan CBM Pages: 2

GRANDE SECONDE DUAL TIME

Brand: Jaquet Droz Pages: 40

Brand: Casio Pages: 7

Brand: MBI Corp Pages: 1

Brand: Bell & Ross Pages: 13

Brand: WEEPLUG Pages: 63

Brand: Fennec Pages: 24

Brand: Casio Pages: 1

Brand: Citizen Pages: 24

Brand: Casio Pages: 6

2019 Smartwatch

Brand: Spade & Co Pages: 21

Brand: Zodiac Pages: 67

Brand: HOLZKERN Pages: 2

Brand: Duxot Pages: 6

Brand: Blaupunkt Pages: 18

Minute Repeater Tourbillon with Bridges

Brand: Girard-Perregaux Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands